How To Use Reese Towpower Adjustable Tow Bar

Installation of the Booty Master Tow Bar

by Thomas Due west

Archetype muscle car with mustang epitome past patrimonio designs from Fotolia.com

Haul Master refers to a line of towing accessories sold by the Harbor Freight Company. Harbor Freight started business in 1968 selling tools at a reasonable cost through mail order catalogs and retail shop locations. The Haul Principal tow bar is designed to tow a vehicle on all 4 of its wheels behind a tow vehicle. The tow bar mounting brackets attach to the front of the vehicle beingness towed. One time this is done, the tow bar tin can exist quickly attached to the brackets and to your tow vehicle'due south trailer hitch.

Footstep 1

Loosen the left and right bar holding bolts on the head of the tow bar assembly with an adjustable wrench in a counterclockwise direction. Swing the left and right bars away from each other.

Footstep 2

Remove the mounting brackets from the left and correct bars on the tow bar associates by turning out the holding bolts with an adjustable wrench turned in a counterclockwise direction. Fix the bolts bated.

Step 3

Select a location on the front of the vehicle to be towed to mount the tow bar mounting brackets. Agree the subclass in place and make marks through the mounting holes and onto the tow vehicle's mounting surface with a felt-tipped pen. Set the mounting brackets aside.

Step 4

Drill through the marks on the tow vehicle with a 1/two-inch drill chip installed into an electric drill. Attach the mounting brackets to the tow vehicle with the bolts supplied with the tow bar. Line upwards the holes in each mounting subclass with the holes y'all drilled. Run bolts through the holes and secure them with a lock nut tightened in a clockwise direction with an adjustable wrench.

Step 5

Attach the tow bar assembly to the mounting brackets on the forepart of your tow vehicle. Place the mounting hole in the cease of the left and right bars into the holes in the mounting brackets. Re-install the original holding bolts through the holes and secure with lock nuts tightened with an adjustable wrench in a clockwise management.

Step 6

Tighten the left and right bar holding bolts on the head of the tow bar with an adjustable wrench turned in a clockwise direction.

Back your tow vehicle upward to the towed vehicle and lower the tow bar coupler to the trailer hitch brawl on your tow vehicle. Slide the hitch ball coupler on the tow bar hitch head until it locks into place.

References

Tips

Things You'll Need